2045A Maxi-Paw Full- or Part-Circle Impact Rotor Pop-Up Sprinklers
Primary Applications: The Maxi-Paw's powerful throw permits maximum spacing and offers superior close-in watering and uniform water distribution. Low pressure loss and an efficient, straight-through flow design conserve energy and are ideal for dirty water applications. The optional Seal-A-Matic prevents run-off, puddling, and erosion caused by low head drainage. And most important, it's rugged and dependable, popping up on schedule again and again because of the multi-function wiper seal. The Maxi-Paw Rotor -- a tradition of excellence. Features and Benefits: Proven impact drive. Straight-through flow for superior performance in dirty water. Five interchangeable, color-coded MPR nozzles with standard trajectory. Two interchangeable low angle (LA) nozzles. Easy to adjust, easy to service. No tools required to change nozzles. Heavy-duty plastic case with sturdy, reinforced ribbed design. Double-weighted arm for slower rotation and increased distance of throw. Self-flushing inner trip with improved inner trip lever. Powerful reverse action. Adjustable arm spring for low-pressure and low-gallonage operation. Energy efficient, low pressure and low-gallonage operation. Full-circle or part-circle arc 20? to 340?. Precision Jet tube (PJ) minimizes side splash. Hooded bearing for longer life. Distance control diffuser pin. Multi-function, pressure-activated wiper seal. Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction. Combination 1/2" (15/21) or 3/4" (20/27) bottom inlet. Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down. FP trip for full- or part-circle operation. Side or combination bottom inlet for design flexibility. Side inlet installation is not recommended in freezing climates. Serviceable through the top of the case. Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water. Optional nonpotable cover. Three-year professional customer satisfaction policy. Models: 2045A Maxi-Paw 2045A Maxi-Paw SAM 2045A Maxi-Paw NP 2045A Maxi-Paw SAM NP Specifications: Precipitation Rate: 0.28 to 1.17 inches per hour (7 to 30 mm/h) Radius: 22 to 45 feet (6,7 to 13,7 m) Radius with Radius Reduction Screw: 18 ft (5,4 m) Pressure: 25 to 60 psi (1,7 to 4,1 Bars) Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m3/h; 0,9 to 0,53 l/s) Combination 1/2" (15/21) or 3/4" (20/27) FPT bottom inlet 1/2" (15/21) FPT side inlet Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow Nozzle outlet trajectory is 23? for 06, 07, 08, 10, and 12 nozzles. LA nozzle outlet trajectory is 11?. Available Nozzles: Standard trajectory 06, 07, 08, 10, 12 Low Angle 07LA, 10LA Dimensions: Overall height: 9 3/10" (23,6 cm) Pop-up height: 3" (7,6 cm) Exposed surface diameter: 5" (12,7 cm)
Primary Applications: The Maxi-Paw's powerful throw permits maximum spacing and offers superior close-in watering and uniform water distribution. Low pressure loss and an efficient, straight-through flow design conserve energy and are ideal for dirty water applications. The optional Seal-A-Matic prevents run-off, puddling, and erosion caused by low head drainage. And most important, it's rugged and dependable, popping up on schedule again and again because of the multi-function wiper seal. The Maxi-Paw Rotor -- a tradition of excellence. Features and Benefits: Proven impact drive. Straight-through flow for superior performance in dirty water. Five interchangeable, color-coded MPR nozzles with standard trajectory. Two interchangeable low angle (LA) nozzles. Easy to adjust, easy to service. No tools required to change nozzles. Heavy-duty plastic case with sturdy, reinforced ribbed design. Double-weighted arm for slower rotation and increased distance of throw. Self-flushing inner trip with improved inner trip lever. Powerful reverse action. Adjustable arm spring for low-pressure and low-gallonage operation. Energy efficient, low pressure and low-gallonage operation. Full-circle or part-circle arc 20? to 340?. Precision Jet tube (PJ) minimizes side splash. Hooded bearing for longer life. Distance control diffuser pin. Multi-function, pressure-activated wiper seal. Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction. Combination 1/2" (15/21) or 3/4" (20/27) bottom inlet. Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down. FP trip for full- or part-circle operation. Side or combination bottom inlet for design flexibility. Side inlet installation is not recommended in freezing climates. Serviceable through the top of the case. Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water. Optional nonpotable cover. Three-year professional customer satisfaction policy. Models: 2045A Maxi-Paw 2045A Maxi-Paw SAM 2045A Maxi-Paw NP 2045A Maxi-Paw SAM NP Specifications: Precipitation Rate: 0.28 to 1.17 inches per hour (7 to 30 mm/h) Radius: 22 to 45 feet (6,7 to 13,7 m) Radius with Radius Reduction Screw: 18 ft (5,4 m) Pressure: 25 to 60 psi (1,7 to 4,1 Bars) Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m3/h; 0,9 to 0,53 l/s) Combination 1/2" (15/21) or 3/4" (20/27) FPT bottom inlet 1/2" (15/21) FPT side inlet Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow Nozzle outlet trajectory is 23? for 06, 07, 08, 10, and 12 nozzles. LA nozzle outlet trajectory is 11?. Available Nozzles: Standard trajectory 06, 07, 08, 10, 12 Low Angle 07LA, 10LA Dimensions: Overall height: 9 3/10" (23,6 cm) Pop-up height: 3" (7,6 cm) Exposed surface diameter: 5" (12,7 cm)